Ball & Plug Valves
A VALVE IS A DEVICE THAT REGULATES, DIRECTS OR CONTROLS THE FLOW OF A FLUID BY OPENING, CLOSING, OR PARTIALLY OBSTRUCTING VARIOUS PASSAGEWAYS.
Valves are technically valves fittings, but are usually discussed as a separate category.
VBS (SPLIT BODY)
Pressure Rating 150Lbs to 4500Lbs and 3000Psi to 15000Psi
Spec.
ㆍWorking Pressure : see above ANSI classes.
ㆍCarbon Steel, Stainless Steel, Alloy Steels, Exotic Materials and Cladded.
ㆍFull and Reduced Bore.
ㆍFlanged or Butt Weld.
ㆍ1/2” to 56”.
Brief Description
- In accordance with API 6D (monogram).
• Quarter-Turn.
• Leakage Rate A or B depending on customer request.
• Soft or Metal Seated.
• Manual or Actuated.
• Bi-Directional.
• Standard, Cryogenic, High Temperature, Corrosive Application.
VBT (TOP ENTRY)
Pressure Rating 150Lbs to 4500Lbs and 3000Psi to 15000Psi
Spec.
ㆍWorking Pressure : see above ANSI classes.
ㆍCarbon Steel, Stainless Steel, Alloy Steels, Exotic Materials and Cladded.
ㆍFull and Reduced Bore.
ㆍFlanged or Butt Weld.
ㆍ6” to 56”.
Brief Description
- In accordance with API 6D (monogram).
• Quarter-Turn.
• Leakage Rate A or B depending on customer request.
• Soft or Metal Seated.
• Manual or Actuated.
• Bi-Directional.
• Standard, Cryogenic, High Temperature, Corrosive Application.
• Easy maintenance in-line.
VBF (FULLY WELDED)
Pressure Rating 150Lbs to 4500Lbs and 3000Psi to 15000Psi
Spec.
ㆍWorking Pressure : see above ANSI classes.
ㆍCarbon Steel, Stainless Steel, Alloy Steels, Exotic Materials and Cladded.
ㆍFull and Reduced Bore.
ㆍFlanged or Butt Weld.
ㆍ1/2” to 56”.
Brief Description
- In accordance with API 6D (monogram).
• Quarter-Turn.
• Leakage Rate A or B depending on customer request.
• Soft or Metal Seated.
• Manual or Actuated.
• Bi-Directional.
• Standard, Cryogenic, High Temperature, Corrosive Application.
• Extended Bonnet for Buried Service.
V81
Pressures rating of 68.9 bar (1000 psig) and 137 bar (2000 psig)
Spec.
ㆍWorking Pressure : 2,000 psig
ㆍStainless Steel and Brass
ㆍDK-Lok 1/4 to 1 in. OD
ㆍPipe thread 1/4 to 2 in.
ㆍSeat : PTFE (Standard), TFM (Optional)
Brief Description
- Compact barstock construction for high integrity.
• Blow-out proof design with internally loaded stem.
• Floating Ball design providing seat wear compensation.
• Micro-finished ball ensures a leak-tight shut-off on pressure.
• Standard lever handle, optional butterfly and dielectric handle.
V82
Pressure Rating up to 3,000psig
Spec.
ㆍWorking Pressure : 3,000 psig
ㆍStainless Steel and Brass
ㆍ2-way and 3-way actuation
ㆍDK-Lok 1/16 to 3/4 in. OD
ㆍPipe thread 1/8 to 1/2 in.
Brief Description
V82 series Ball valves are classfied into 3 types according to the temperature range in use. V82 series is for general use and VL82 is adequate to the low temperature range. VG82 can be used in the widen temperature range from low to high temperature. The exact temperature range of each type is referred to the technical data of the type.
V83
Pressure Rating up to 3,000 psig (206 bar)Features
Spec.
ㆍWorking Pressure : 3,000 psig
ㆍStainless Steel and Carbon Steel
ㆍDK-Lok 1/4 to 1 in. OD
ㆍPipe thread 1/8 to 1 in.
Brief Description
- Pressure and temperature compensation seat design.
• Swing-out design for fast and easy maintenance with the valve in-line.
• Chevron packing design.
• 2-way (on-off) valves with quarter-turn actuation.
V86
Pressure Rating up to 689 bar (10,000psig)
Spec.
ㆍ2-way on-off Valves
ㆍ3-way on-off Valves
ㆍWorking Pressure : 10,000 psig
ㆍStainless Steel and Carbon Steel
ㆍDK-Lok 1/4 to 1 in. OD
ㆍPipe thread 1/4 to 1 in.
Brief Description
- Blowout proof design with internally loaded stem.
• Handle indicates the flow direction.
• Positive stop with a robust stop pin.
• High flow rate with maximum orifice.
• Various end ports including DK-Lok tube port.
• Various flow control with side and bottom inlet port on 3-way diverter valves.
• Designed to control fluids in full open or full closed position.
VH86
High Pressure Multi Purpose Ball ValvesFeatures
Spec.
ㆍ2-way bi-directional Valves
ㆍ3-way diverter Valves
ㆍWorking Pressure : 6,000 psig
ㆍStainless Steel
ㆍDK-Lok 1/8 to 3/4 in. OD
ㆍDK-Lok 3mm to 16mm OD
ㆍPipe thread 1/8 to 1/2 in.
Brief Description
- High flow in a compact design.
• High pressure capacity designed for blow-out proof with internally loaded ball stem.
• Micro-finished ball provides a positive seal.
• 90 degree actuation for 2-way and 180 degree actuation for 3-way ball valves.
• Panel mounting as standard.
• Chevron stem seal, adjustable with the handle disassembled.
• Handle indicates flow direction.
• Low operating torques and positive handle stops.
• Optional pneumatic actuation.
VT86
VT86 Series Pressure Rating up to 413bar (6,000 psig)
Spec.
ㆍ2-way on-off Valves
ㆍ3-way on-off Valves
ㆍWorking Pressure : 6,000 psig for VT86 Series 10,000 psig for VTH86 Series
ㆍStainless Steel
ㆍDK-Lok 1/4 to 1/2 in.
Brief Description
- The Trunnion ball valve is featured by blowout-proof
design with cylindrical extensions at the top and bottom of the ball.
• The trunnion prevents the ball from shifting and permits the ball to rotate on a vertical axis.
• Integral ball stem machined from single piece of bar stock eliminates the backlash during handle actuation.
• Panel mounting nut is standard permitting valve to panel or actuator.
• Designed to control fluids in full open or full closed position.
Message from Dk-Lok
We continue to strengthen our basis for growth through continued product facility investment, human resources training, and R&D, toward the development of new technology. Owing to the offshore plant era, we are recording growth in both domestic and overseas sales volume.
V87
Pressure Rating up to 500 bar(7,250 psig)
Spec.
ㆍUp to 7,250 psig (500bar)
ㆍUp to 100℃ (212℉)
ㆍDIN 1,4404, SS316L
ㆍDIN O.D 6mm ~ 38mm
ㆍPipe thread 1/8 ~ 1 in.
ㆍBall valve to DIN standard
Brief Description
- Positive stop with robust stop pin
• Various end ports including DIN Standard port
• Hydraulic fluids
• Compressed Air
• Fuel oil system
V23
Pressure Rating up to 3,000 psig (206 bar)
Spec.
ㆍWorking Pressure : 3,000 psig
ㆍStainless Steel and Brass
ㆍForward flow throttling
ㆍDK-Lok 1/8 to 1/2 in. OD
ㆍPipe thread 1/8 to 1/2 in.
Brief Description
- Positive shut-off, high flow capacity
• Quick quarter-turn operation
• Unique forward flow throttling
• Low torque operation
• Unidirectional flow
• Optional downstream vent
Key Operation Ball Valve
Pressure Rating up to 68.9 bar(1,000 psig)
Spec.
ㆍSize: 1/2″~1″, 15A~25A
ㆍHandle Type: Blue & Red color
ㆍBody Material: SS316
ㆍPressure Rating: 68.9bar (1,000 psig)
Brief Description
• Compact barstock construction for high integrity
• Blow-out proof design with internally loaded stem
• Floating Ball design providing seat wear compensation
• Micro-fi nished ball ensures a leak-tight shut-off on pressure
• Standard PTFE seat material
Go back to Valves!
Cilck button.